Đăng nhập / Đăng ký
  • English
  • German
  • Tiếng Việt
Tagline

Combo chẩn đoán Mercedes: Laptop CF-D1 + Phần mềm Mercedes + C6 Vci original + Sách Mercedes

Combo chẩn đoán Mercedes: Laptop CF-D1 + Phần mềm Mercedes + C6 Vci original + Sách Mercedes

Giá liên hệ

Bộ Combo thiết bị và phần mềm chẩn đoán xe Mercedes đầy đủ nhất bao gồm ✅ laptop chuyên dụng Panasonic Toughpad CF-D1 + ✅ Full các phần mềm chẩn đoán và lập trình Mercedes + ✅ thiết bị kết nối C6 Vci original + ✅ Sách Vediamo Engineer system training Mercedes (chính hãng).

Combo Mercedes: Panasonic Toughpad CF-D1 + Full software Mercedes+ C6 Vci original + Books Training Mercedes

Combo Mercedes: Panasonic Toughpad CF-D1 + Full software Mercedes+ C6 Vci original + Books Training Mercedes

Panasonic Toughpad CF-D1 MK4

Panasonic CF-D1 ToughPad Core i5 + 8GB+250GB SSD
( Core i5+8GB RAM +250GB SSD )

Panasonic Toughpad CF-D1 MK2 Rugged Tablet is built to withstand the harshest environments! Designed and engineered to be the highest performing fully rugged tablet in its class today, this 13.3 Inch tablet complies with the Military standard MIL-STD-810. The 13.3″ widescreen HD LED display allows field engineers to easily run real-time diagnostic programs, read telemetric data and view schematics and designs. The screen has been specifically built for clarity both inside buildings and for use outside in bright sunlight when field engineers are doing pre-diagnostics tests. The resistive Touchscreen allows for easy data input using fingers, gloved hands, or pens.

Make no mistake, this is the toughest windows tablet you will come across, made to withstand the rigors of the battlefield and drop tested at 1.2M. The Toughpad compliments the now legendary “Toughbook” brand and has moved the range up a gear with this newly styled windows based PC Tablet. The Toughpad CF-D1 now sports a 13.3″ Toughened Touchscreen display, with brightness levels so good that it can be viewed in direct sunlight, perfect for outdoor use and the new 10 point touchscreen can even be used with protective gloves on in the wet! Made to go wherever you need to, the battery life has been extended to up to 12 hours.

Panasonic CF-D1 ToughPad Core i5 + 8GB+250GB SSD
( Core i5+8GB RAM +250GB SSD )
13.3″ Active Matrix (TFT) colour LCD 1366 x 768 pixels (HD) with Touchscreen. Up to 400cd/m² transmissive brightness.
Optional outdoor display: 1.000cd/m²
Intel® HD 4000 graphic
Anti-reflective and anti-glare screen treatments
Ambient light, accelerometer, and digital compass sensors
Intel LAN Upgrade
WIFI
Optional GPS
4G Mobile Broadband (Gobi 5000, up to 21Mbps DL)
Bluetooth® 4 + EDR Class 1
Intel HD Audio
Weight: 2.25KG
Dimensions: 349mm x 46 x 244mm {13.7″ x 1.8″ x 9.6″}
Windows 10 Pro
Li-Ion Long-Life battery (up to 12 Hrs)

INSTALL FULL SOFTWARE MERCEDES

Combo Mercedes: Laptop Panasonic Cf-D1 + Full software Mercedes+ Ecom Doip original + Books Training Mercedes

Install full software diagnostic coding programming retrofit Mercedes Benz by Teamview

full software mercedes 12/2021

Software XENTRY version 12/2021

xentry_12/2021

 

DAS SCN offline

xentry_12/2021_fixed_das_work_offline

+Xentry RDS full file flash

Dtsmonaco 9.02 Full license projects 2021 have function Doip

Dts_monaco_9.02_Full_license_Project 2021

Dtsmonaco 8.16 Full license projects 2021 have function Doip

Dts_monaco_8.16_Full_license_Project 2021

Let’s see 5.0.1 full database Full flash file

vediamo_5.01.01_full_projects

Wis 10/2020

wis_10/2020

EPC 11/2018

epc_11/2018

Starfinder Version 2016

Starfinder_Version_2016

Starfinder Version 2016-2020

Starfinder_Version_2020

Download_Manager_COMAND 2.04

Download_Manager_COMAND

UnlockECU

unlockecu

SWFinder 5.2

SWFinder_5.2

Seedkey2.3

seedkey_2.3

Xentry SP Password Calculator

seedkey_2.3

VeDoc Calculator

Xentry Special Funcions Calculator

 

VGSNAG 2 Manager 1.6

VGSNAG2_Manager_1.6

C6 Vci Original Mercedes Benz Xentry VCI Diagnostics System Genuine BOSCH Software V2021.12 Multiplexer Kit 3/4

C6-vci-original

Original-Mercedes-Benz-Xentry-VCI-Diagnostics

MB Star C6 specialized diagnostic equipment is the latest version of diagnostic equipment with the latest interface for Mercedes Benz & SMART models, it can replace two lines of Mercedes Benz Star C4 and Mercedes Benz Star C5 devices. It is a version with a completely different interface, it is an intermediary bridge to help stabilize the connection between the vehicle and the diagnostic software.

 

Description

Genuine Mercedes Benz Xentry VCI Diagnose Tool

Original available in original generation of dealer diagnostic scanners for Mercedes cars. The device was developed by Bosch. Mercedes Benz Xentry Diagnosis VCI Multiplexer supports a full range of service functions such as reading and deleting trouble codes, activations, coding, performer tests, programming and block coding, full SCN & DAS support. Mercedes XENTRY VCI Comes in a compact rubberized case, does not have batteries, fans, or display on board. An external power supply is not required, the power supply is made from a diagnosed vehicle.

 

This is Original Bosch Mercedes Xentry the VCI:

Xentry Diagnosis VCI Mercedes Original
Firmware upgraded to version 12. 2021v
A little Bu. ( State: Brand New)
Included is a compatible USB-WIFI ] Adapter and an OBD cable.
Works great with Xentry Diagnosis Open Shell

Original Mercedes Xentry VCI belongs to the latest generation of dealer diagnostic scanners for Mercedes cars. The device was developed by Bosch. In view of the fact that the idea of ​​placing all diagnostic Software in the “head” using the example of Xentry Connect C5 (the fifth old) failed, it was decided to develop a completely new device with new circuitry, which will be only a gateway executor running a Tablet or laptop installed software. The ability of the device to work with the car under the new SCN & DAS protocols. If you want to work with the newest cars of the current year, then you should buy Bosch Xentry Diagnosis VCI.

Mercedes-Benz-Xentry-Diagnosis-12-2021

What are the prospects for Bosch Xentry Connect and Xentry Diagnosis VCI :

Xentry Connect , A Mercedes dealer of the current generation, is removed from production: it is replaced by Xentry Diagnosis VCI from Bosch. Perhaps, Xentry Connect will be the last product of the Actia for Mercedes Benz. Unfortunately, Xentry Connect has become one of the most unsuccessful multiplexers for Mercedes diagnostics.

The NEW Xentry Diagnosis VCI is fundamentally different for the better from its predecessor :

easy and convenient, without built-in PCs and hard drives inside, no fans, battery, and display

Please Note: You do not need to constantly update the internal firmware, no external power is required

Mercedes-Benz-Xentry-Diagnosis-12-2021

Specification :

Mercedes Benz Xentry Diagnosis VCI Specifications:
Clock rate 800MHz
RAM 512 MB DDR3 RAM
ROM 512 MB
Flash MASS STORAGE (opt) USB Memory Stick
User interface
LEDS 5 status LEDs
Acoustic signal beeper acoustic signal

Power supply: From the vehicle battery via the diagnosis connection cable
or via a connected USB cable 8V to 28V

Important:

The diagnostic socket of a vehicle must be secured
with a fuse of a maximum of 6A/ 32V.

Mechanical Properties:

Dimension 168x115x45 mm
weight 2.1 kg
Power supply 750 mA
Imput voltage (fail-safe) 8to 28 VDC
Operating Temperature -40 CO -+80 CO
Storage Temperature -40 CO -+80 CO
Humidity at 25 CO 30 % – 95 %
Maximum operating height 4000m
Protection class, diagnosis connection cable not plugged in IP 30
Protection class, diagnosis connection cable plugged in IP54
Diagnosis connection cable
J1962 (ISO 15031-3) 26 pins

Software Version.: 2020.12v

Certification

VCI, FCC, CE

 

DTS Monaco Mercedes – Benz Super Engineer DTS Training Materials Firsit book for real special functions. DTS Usage And Case

-DTS-Monaco, boost your knowledge in Mercedes Benz, coding, and SCN coding

-297 pages included:

+DTS Monaco is a universal engineering test terminal for the diagnosis and control function of the vehicle controller, The name Monaco is derived from the modular analyzer used in vehicle traffic

+DTS Monaco covers all the tasks in the field of engineering, testing, and production test preparation

+When Mercedes Benz maintenance test it is the greatest authority, the perfect support for C4 (SDconnect) and (Ecom) Hardware(at present, Das-xentry. Vediamo lower authority)

DTS-Monaco special feature:

1.Quick Test: Entire vehicle ECU quick test and the test can choose to edit more


2.Variant Coding: Coding with variation add VO- delete VO function
3.ID identification: One-click to read the whole car and save all modules programmed numbers


4.Complete Variant Coding: One time to read all the ECU coding vehicle data, can be written to the vehicle again, completely off-line operation
5.Diagnostic Services: Advanced features can see your choice of internal and external data module, turn on the computer authorization(not driving license), Activate ECU, reset ECU, modifying the original chassis number


6.Flash programming: Fully offline programming
7.Diagnostic Trouble Code: Diagnostic module DTC fault code
8.ECU Exchange: Two of the same ECU, by reading data import data exchange


9. Symbolic trace: Record and track the file, after repeated viewing, analysis of fault logic point

10. One key to saving the whole car code.

11. Single control unit coding

12. Introduction to DTS

13. DTS system icon introduction

14. Introduction to CBF\CF\SRM-D\SMR-F

15. CBF\CF\SRM-D\SMR-F file path

16. Common control unit name ( CBF)

17. Common control unit name ( SMD-D )

18. DTS and Let’s see diference

19. DTS is connected to the vehicle ( provided: VCI connect OK )

20. DTS is connected with the vehicle,…

See details here: https://eucartech.com/en/product/dts-monaco-engineering/

2. Vediamo Engineer system training Firsit book for real special functions DTS Usage And Case

Some main functions of Vediamo books:

1. Mercedes-Benz engineer let’s see exchange study

2. CBF CFF file default storage location

3. Vediamo establishes a connection with the vehicle

4. Connection to the vehicle

5. Establish a connection with the vehicle

6. Let’s see databases

7. Let’s see data cbf file import

8. Common control unit name (CBF)

9. Let’s see data smr-d file import

10. Common control unit name (SMR-D)

11. Vediamo establishes a connection with the vehicle

12. Connection protocol selection

13. Main button function description

14. Module submenu description

15. Read and save module information

16. Reading and saving of coded data

17. Coding and saving (offline coding can be realized)

18. Fault reading and fast clearing

19. Select programming file CFF

20. 212 Turn on the turn assist light

See details here: https://eucartech.com/en/product/vediamo-engineer-system-training-book/


Sản phẩm tương tự

Để lại bình luận

Panel only seen by widget owner
Eucartech
Nhấn vào để trả lời
Eucartech
Hi there 👋

Tôi có thể giúp gì cho bạn?
13:12
Bắt đầu chát
Zalo
X

    X
    Cảm ơn bạn đã gửi thông tin.
    Chúng tôi sẽ liên hệ với bạn sớm nhất.
    X
    Cảm ơn bạn đã gửi thông tin.
    Chúng tôi sẽ liên hệ với bạn sớm nhất.
    X
    X